Superior SV12 03
Superior SV12 03 Specification custom bass guitar
Strings: 4
Number of frets: 24
Scale: 34"
Build type: single-cut
Body: American walnut
Top: poplar / padouk and back: poplar / padouk
Neck: 3 pc. of maple, neck-trough, single-cut
Fingerboard: Ebony
Pots: volume, pickup's balance, passive tone, Hi / Mid / Low (Aguilar Active boost/cut +-18dB)
Switches: coil tap (single / humbucker), Mid frequency- 400/800 Hz, active / passive
Electronics: Aguilar OBP3, DualCoil / DualCoil Aero
Bridge: Zakrzewski Basses Design
Tuners: Kluson
Straplock: DUNLOP
Superior SV12 03 Price
4 Strings: €5 700
Superior SV12 03 Price
4 Strings: €5 700
Share This Story!
Additional information
The bridge I use was designed by myself, from the ground up, to fit my design specifically.
The bridge is made of hard aluminum (PA6) or brass. In the aluminum version, it comes in a black finish and weighs 0.14 kg (5 strings).
The brass version comes in a gold or silver finish and weighs 0.4 kg (5 strings).
The saddles of the bridge are made of brass and the rod on which the string rests is a very dense type of steel, used for manufacturing bearings.
Each bridge is designed to accommodate RMC’s piezo saddles in the future. So you can upgrade ANY Zakrzewski bass to a piezo option with NO ADDITIONAL DRILLING REQUIRED.
The string spacings at the bridge are 20mm for 4-string, 18.3mm for 5-string, 18.5mm for 6-string and 17mm for 7-string.
If you want to know more about how it all works please see the Instructions & Manuals tab.
In the Zakrzewski Basses project, we most often use the Aguilar OBP3 preamp with the possibility of Boost/Cut HI / Mid / Low regulation, and a switch for the Mid frequency range – 400/800 Hz.
I’ve co-designed my own pickup designs with Merlin Pickups, which are available in both SingleCoil and DualCoil versions for fretted basses and a custom SplitCoil Single for the fretless Exclusive model.
If you want to know more about how it all works please see the Instruction & Manuals tab.
The Zakrzewski Module is a plate located on the top of the instrument with the switches and the Output Jack(s).
It had been designed to facilitate future upgrades of the instrument.
It is a replaceable element, I can add Output Jacks and/or switches without interfering with the structure of the instrument, simply by making a new Module plate and replacing the old one.
If you want to know more about how it all works please see the Instruction & Manuals tab.
I approach every build individually. A detailed conversation allowing me to know everything I need to know about your bass-related needs, warrants a 100% satisfying build that fits Your individual needs.
Therefore, no matter how much you know about your own expectations regarding your new bass, or if you’re not sure how to begin configuring it by yourself – feel free to contact me. I’d like your new bass to be exactly as you pictured it in your dreams!
The prices shown above do not include custom modifications, although those are always possible.
Shipping is not included in the base price, it is calculated individually during the ordering process.
The main condition for a bass build to get started is a 40% down payment, calculated from the price that was agreed upon.
The completion time varies around 3 months, starting with the down payment being received by me.
My instruments come with a limited warranty:
Electronics (pots, preamps, pickups, switches) are covered with a 2-year warranty;
Hardware (tuners and bridges) are covered with a 5-year warranty;
The build itself (all of the elements made of wood) is covered with a 10 year warranty.
The warranty in all aspects begins with the original (1st owner’s) purchase date.
Here you will find instructions for operating the basic electronics and bridge setup.
Superior SV12 03 gallery
